Pulse bag filter is one of the dust which in the current market is widely used industrial dust collector, but its long-term use will inevitably be some failures, following Zhengzhou Pu Technology Co., Ltd. will be brief FAQ pulse bag type dust prone: 1, pulse bag type dust leakage phenomenon occurs: Because ESP installation or improper operation and maintenance, resulting in the presence of dust removal equipment leakage phenomenon, a lot of the outside cold air sucked into the bag type dust collector inside, the air temperature so that a sharp decline in the local dust, moisture in the air to precipitate, resulting in condensation. Many causes leakage of bag-type dust collector, there are weld leakage phenomenon caused by the presence of dust in the production casing installation process, there unloader Mifengbuyan cause leakage, there is the phenomenon of non-standard weld pipe caused by the presence in the installation process leakage, there are dust and non-standard pipe flange connections Mifengbuyan cause leakage and so on. 2, pulse bag type dust condensation phenomena: 1), when the processing of flue gas moisture content is too high, over-saturated water precipitation, the resulting condensation. This phenomenon in the cement kiln dust dry normal especially prominent, since the normal cement dry kiln flue gas conditioning tower commonly used cooling quenching, when the jet of water is too large, resulting in the flue gas will produce condensation water produced when oversaturation. 2) When the flue gas bag-type dust collector process itself temperature is near or below the dew point temperature will produce condensation, so pay attention to insulation work bag-type dust collector. 3), pulse bag type dust collector pulse jet cleaning process using compressed air, and the compressed air is itself a relative humidity of 100% saturated air. Because of its greater than atmospheric pressure, relative to ambient dew point dew point conversion to low atmospheric pressure, there is condensation from the trend. When the air temperature is lower than many bag type dust inside the flue gas temperature, the general will produce condensation. Zhengzhou Pu Technology Co., Ltd. is specialized in environmental protection equipment research and development of technology-based manufacturing enterprises. Company R & D, design, production and sales, specializes in designing complete a variety of automatic batching, automatic sorting conveyor, industrial dust, air purification, water treatment and other large projects, be modified to optimize the entire system and provide related equipment manufacturing, installation and commissioning and other improved services. 

keywords: Pulse bag filter, dust, dust removal equipment,